Chinashop Store Wholesale Electronics & Gadgets ❤️ 3D Printers

Chinashop Store carefully selected the best 3D Printers and accessories for you to choose from. Whatever you are finding a 3d Printer Pei Cold Printing Film a Silicone Rubber Hot Bed 120w Heating Pad Plate, you'll get a cheap price on #Chinashop.Store And our products are free shipping.
Sort By:  
3d  Printer  Pei  Cold  Printing  Film  Panel 300*300*0.3mm Amber Adhesive Tape Accessories Film Panel As picture show

--Easy to use, the back glue has been pasted, easy operation.

--Flexible, detachable, very well adheres to the magnet.

--Suitable for all kinds of fibers, especially for PLA and ABS.

--Free cleaning, just bend the board slightly, then cool and then print.

--Never warp, never rust.

26.49€
Silicone  Rubber  Hot  Bed 120x120mm 12v 120w Heating Pad Plate 3d Printer Accessories As picture show

--3M adhesive is easy to install.

--Fast heating, silicone rubber hot bed, low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.

--Wonderful silica gel heater for your 3D printer heat-bed.

--Waterproof and non-toxic.

22.15€
10 Pcs/set Photosensitive  Resin  Filter  Funnel 3d Printer Accessories Photocuring Consumables Sla Consumables Filter As picture show

--Thick paper, good filtration, saving materials.

--Very practical 3D printer filter funnel.

--Use high-quality paper, durable and environmentally friendly.

--Durable, easy to use, sturdy, 3D printer accessories.

--The Funnel is designed to be collapsible or folding, easy to use and store.

7.35€
3d  Printer  Pei  Cold  Printing  Film  Panel 300*300*0.3mm Amber Adhesive Tape Accessories Film Panel As picture show
3d Printer Pei Cold Printing Film Panel 300*300*0.3mm Amber Adhesive Tape Accessories Film Panel As picture show (FQZOL_B5WDXTB9)

Description:

Product name: PEI Cold Printing Film Panel

Gum: 468p

Features: easy to use

Temperature: ≤ 100 ℃

Model: 300 * 300 * 0.3 mm Pei with back glue

PEI:

PEI refers to polyetherimide (Polyetherimide), it also refers to personnel efficiency indicators. PEI (polyetherimide) is an amber transparent solid. Without any additives, PEI raw material particles have inherent flame retardancy and low smoke. The oxygen index is 47%, and the combustion rating is UL94-V-0. The density is 1.28~1.42g/cm3. PEI has strong high temperature stability, even non-reinforced PEI, still has good toughness and strength. Therefore, the superior thermal stability of PEI can be used to make high-temperature heat-resistant devices. It has excellent mechanical properties, electrical insulation properties, radiation resistance, high and low temperature resistance and abrasion resistance, and can transmit microwaves.

PEI boards are non-crystalline plastics. It is an amorphous high-performance polymer. It is made of engineering plastics made of amorphous PEI (polyetherimide) through extruder at high temperature.

Packing list:

300*300*0.3mm PEI Cold Printing Film Panel*1

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.

--Easy to use, the back glue has been pasted, easy operation.

--Flexible, detachable, very well adheres to the magnet.

--Suitable for all kinds of fibers, especially for PLA and ABS.

--Free cleaning, just bend the board slightly, then cool and then print.

--Never warp, never rust.

26.49€
Silicone  Rubber  Hot  Bed 120x120mm 12v 120w Heating Pad Plate 3d Printer Accessories As picture show
Silicone Rubber Hot Bed 120x120mm 12v 120w Heating Pad Plate 3d Printer Accessories As picture show (FQZOL_J5RE3PS3)

Description:

Product name: Silicone Heated Bed

Color: Orange

Material: silicone rubber (with 3M back glue)

Size: 120mm x 120mm

Voltage: 12V

Power: 120W

Net weight: 95g

The working temperature should be lower than 200 ℃ for continuous use

Tips:

1.The maximum temperature of the silicone heating plate is about 200 degrees (silicone material is resistant to temperature), and it is easy to burn out if it exceeds the heating plate. The silica gel heating plate cannot be used in water, and it will be no problem if the surface is stained with water during use.

2.The silicone pad heats up quickly, please take anti-scalding measures.

Packing list:

120x120mm 12V 120W Silicone Heated Bed*1

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.

--3M adhesive is easy to install.

--Fast heating, silicone rubber hot bed, low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.

--Wonderful silica gel heater for your 3D printer heat-bed.

--Waterproof and non-toxic.

22.15€
10 Pcs/set Photosensitive  Resin  Filter  Funnel 3d Printer Accessories Photocuring Consumables Sla Consumables Filter As picture show
10 Pcs/set Photosensitive Resin Filter Funnel 3d Printer Accessories Photocuring Consumables Sla Consumables Filter As picture show (FQZOL_WTIKOO44)

Description:

Product name: Photosensitive  Resin  Filter  Funnel

Features: thickened version

Color: white

Type: photosensitive resin filter funnel

Packing list:

10 pcs*Photosensitive Resin Filter Funnel

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.

--Thick paper, good filtration, saving materials.

--Very practical 3D printer filter funnel.

--Use high-quality paper, durable and environmentally friendly.

--Durable, easy to use, sturdy, 3D printer accessories.

--The Funnel is designed to be collapsible or folding, easy to use and store.

7.35€
Per Page      1 - 3 of 3
  • 1